This interactive video is a must-watch for anyone who desires to get better at their hobby. Highlights include: – Wireless sequences and data over different components; understanding if there’s any interference or glitches and how to overcome them. – The… Read More
Setup: Connect your Falcon F16v3 to your Show Computer Network
In this short video, you will learn the basic steps of how to easily set up your computer using windows 10. You will also discover a faster and more effective approach to set up the configuration from your Windows computer… Read More
ANIMATED LIGHT SHOW NETWORK BASICS
Discover the network basics for animated light shows in this interactive video tutorial; as you get started with the fundamental understanding of how to start your own show from a networking point of view. The E1.31 is the data transfer… Read More
Setting Up E1.31 on Windows 7 (Part 4 DMX Controller Setup)
This final video is dedicated to setting up the “EASY DMX” controller boards used in RGB displays. The video demonstrates how all the components connect together. Following the instructional section is a demonstration of the entire setup running a sample… Read More
Setting Up E1.31 on Windows 7 (Part 2 LOR and E1.31 Output)
Part 2 of this series shows how to configure LOR . We go through network settings in the S3 software as well as configuring the universes . We also discuss a bit of Multicast vs Unicast. Finally there is a… Read More
Setting Up E1.31 on Windows 7 (Part 1 Network Settings)
This is a 4 part video series on how to setup your Light O Rama computer to output E1.31 protocol. E1.31 allows data to be sent from the sequence to the controllers.